Wearable technology is sought after by users because they help to analyze people's daily activities and exchange information in an intuitive way, greatly improving our lifestyle and bringing us convenience. There are a variety of wearable electronic devices on the market, most notably smart watches, activity monitors and fitness bracelets. These highly portable devices are worn on the user or otherwise attached to the person and can measure and capture information through one or more sensors (see Figure 1).
Figure 1: A typical wearable device integrates user data and external data. It works with an external device to analyze and display information to the user.
These devices continuously monitor user activity, even when they are sleeping. They run a variety of complex algorithms to extract meaningful information. For example: the wearer's sleep situation, and display the monitoring results to the user through an intuitive way and wireless interface. Because these devices provide important information that can change user activity, they must be reliable and accurate. In addition, in order to maximize battery life, they should be as efficient as possible.
Wearable devices typically have one or more sensors, storage devices, connectivity devices (RF controllers), a display, and a battery (see Figure 2). In addition to high functionality, reliability, and energy efficiency, wearables should be small, lightweight, and inexpensive, and can support a variety of different communication modes.
Figure 2: Block diagram of a wearable device showing the MCU, sensors, flash memory, battery and power management devices, connectivity subsystem, and display.
Existing communication protocols on the market include standard protocols such as ZigBee, Wi-Fi, Classic Bluetooth, and various proprietary protocols developed by chip vendors. Standard protocols are not designed to consider low power consumption as an important feature, so for a long time, most OE vendors chose to use proprietary protocols in their low-power products. However, using these proprietary protocols creates a lot of interoperability limitations and reduces design flexibility.
To eliminate these limitations and create an interoperable environment, the Bluetooth Technology Alliance (SIG) has introduced a new Bluetooth version, Bluetooth Smart, a wireless standard designed to achieve short-range communication at the lowest power consumption.
Advantages of Bluetooth Smart
Like the classic Bluetooth protocol, the Bluetooth Smart Protocol works in the 2.4 GHz ISM band with a bandwidth of 1 Mbps. But unlike the classic Bluetooth protocol, the Bluetooth Smart Protocol offers a number of features for low-power wearable applications. Its low data rate makes it ideal for applications that only need to exchange status information. The protocol is optimized to deliver a small amount of bursts at regular intervals, allowing the host to maintain ultra-low power modes while transmitting information. In addition, it reduces the time it takes to establish a data exchange connection to a few milliseconds.
Each layer of the Bluetooth Smart Architecture is optimized to reduce power consumption. For example, it uses a larger physical layer modulation index than the classic Bluetooth protocol, which helps to reduce the transmit and receive current. The link layer is also optimized for fast reconnection, which reduces power consumption. The controller is responsible for performing various important tasks, such as establishing connections and ignoring duplicate packets, thus allowing the host to maintain a low power mode for a longer period of time.
The Bluetooth Smart Protocol has a reliable architecture similar to the classic Bluetooth protocol and supports adaptive frequency hopping and 32-bit CRC. In addition, it supports a special mode called "broadcast mode" that allows devices to transfer information without having to perform a linker.
The Bluetooth Smart Protocol is ideal for wearable devices for the following reasons:
This protocol is optimized for ultra low power consumption;
Low-power design helps reduce battery size, reducing product cost, size and weight;
Support for wearable devices that exchange small amounts of burst information over long intervals;
Easy to promote, because the Bluetooth-enabled host (a dual-mode device that supports classic Bluetooth and Bluetooth smart protocols) is built into the smartphone. This is in stark contrast to proprietary protocols that require additional effort by vendors to ensure connectivity.
A typical usage pattern for wearable devices offers multiple opportunities for devices to enter ultra low power or standby mode (see Figure 3).
Figure 3: The normal use mode of wearable devices such as activity monitors provides multiple opportunities for devices to enter ultra low power or even standby mode
Even during the event, the wearable device does not have to continuously send data. Whether it is the motion data measured by the three-axis accelerometer or the heart rate sensed by the sensor, the data is transmitted periodically, usually every connection interval. The normal procedure is to sense the data, convert the data, and then send the data over a Bluetooth smart connection. The rest of the time, the system is in deep sleep mode. Note that most existing chip solutions offer multiple power modes that can be traded between current consumption and wake-up time in a given power mode. Different modes should be selected according to the time requirements of the system.
It must be noted that the communication protocol is only one aspect of the wearable design. In addition to the communication interface, the wearable device also includes a sensor, an analog front end (AFE) for processing sensor signals, a digital signal processor for filtering environmental noise, a storage device for storing information, and one for implementation. A variety of other system-related functions of the processor, a battery charger and other modules. When designing a system, we need all of these components to achieve the lowest power consumption.
Dehydrated Lettuce,Dehydrated Lettuce Powder,Dehydrated Lettuce Slices,Canned Dehydrated Lettuce Slices
Xinghua Lvwei Foods Co.,Ltd , https://www.lvweifoods.com