Asphalt softening point tester technical support

Asphalt softening point tester model: SYD-2806F

SYD-2806F asphalt softening point tester is according to the People's Republic of China standard GB/T 4507 "Petroleum asphalt softening point determination method", the People's Republic of China industry standard JTG E20-2011 "Highway test asphalt and asphalt mixture test procedures" T 0606 -2011 "Asphalt softening point test (global method)" requirements for the design and manufacture of road asphalt, coal tar, liquid petroleum asphalt and other types of asphalt softening point determination, is the asphalt production enterprises, roads, bridges Preferred instruments for construction units and related universities and research institutes.

This instrument can also be used to test the softening point of resin products.

First, the main technical characteristics of SYD-2806F asphalt softening point tester

1. The instrument is a small desktop structure, which adopts microcomputer control, linear heating and automatic stirring. The measurement results are accurate and reliable, and the test results are automatically displayed after the test is completed.

2. The beaker is made of high temperature resistant glass, and the specifications of the steel ball positioning ring and steel ball meet the requirements stipulated by the standard.

3, the water bath has an automatic stirring device, using digital tube to display time and temperature, and can test two samples at the same time, the test is convenient and the result is reliable.

4, the instrument water bath zui high heating temperature is 160 ° C.

Second, SYD-2806F asphalt softening point tester main technical parameters and indicators

1, the power supply voltage: AC220V (allowable error -5% ~ +10%), 50Hz;

2. Measurement range: (1) If the softening point of the sample is below 80 °C, use distilled water as the heating medium, +5 °C ~ +80 °C;

(2) If the softening point of the sample is above 80 °C, use glycerin as the heating medium, +32 °C ~ +160 °C;

3, temperature resolution: 0.1 ° C;

4, heating rate: automatically adjusted to 5.0 ± 0.5 ° C / min after three minutes;

5, the agitator: the stirring speed is continuously adjustable;

6, heating power: 800W;

7. Heating medium: glycerin;

8. Effective volume of beaker: 1000ml;

9, relative humidity: ≤ 85%;

10. Power consumption of the whole machine: no more than 850w.

11. Dimensions: 210mm × 350mm × 400mm (length × width × height).