First, the adjustment of feeding and drinking of drinking water should begin at the time of brooding. A special kind of sound is usually used as a signal. The sound should be soft and loud, and the duration can be long or short. Whistles and percussion metal objects are used in production. For example, before feeding, the chicken should have a hungry time, and then give a signal (such as whistle) while feeding, and the feeding action can be seen as much as possible by the chicken so as to produce a double sense of hearing and vision and accelerate the conditions. The formation of reflections. The same signal is repeated for each feed, and conditioned reflexes are usually established in about 3 days.
Second, grazing training stocking one day before the afternoon or evening, once the chickens into the stocking house, the first day after the morning do not put chickens immediately after dawn, let the chicken stay in the chicken house for a longer period of time in order to familiarize with the new environment . Wait until after 9 am to release the feed. The feeding trough was placed 1-5 meters away from the house and the chickens were free to feed. In the first few days, the stocking time should be shorter each day, and then the stocking time should be increased day by day, and fences should be set to limit the scope of activities, and then continue to expand the stocking area.
Third, pre-laying chickens prefer to lay eggs in a darker, better hidden, quieter place, so there will be a sense of security, production is also relatively smooth. Before the first egg is laid, hens often show uneasiness and find suitable sites for laying eggs. When chickens see nests of other chickens or eggs in nest boxes, they will feel a sense of identity and think that this nest is suitable for laying eggs, and it is easy to use it as its own nest for laying eggs. The egg production of the chicken has a nesting property. Generally, the first egg of the chicken is located in this place. After that, the egg is still produced in this place. If this place is occupied by other chickens, it is better to wait at the entrance of the nest than to enter the empty space next to it. nest. Therefore, pre-production tuning is extremely important. About one week before the start of production, nest boxes should be placed to familiarize the chickens with the environment inside the nest box. The nest boxes should be placed in a backlit or darkened position to keep the egg boxes quiet and undisturbed. The nest boxes should be sufficient. Generally, five hens should be placed in one nest. There should be clean and dry bedding in the nesting box.
Shaft Collar
Shaft Collars are common pieces of hardware used for holding bearings and sprockets to shafts, situate components in motor and gearbox assemblies, and serve as mechanical stops. Shaft collars can be found in virtually any type of machinery and are frequently accessories to other components. Shaft collars provide three primary functions: 1) holding components in place, 2) locating or positioning components on a shaft, and 3) creating an attachment between shaft and another component. Despite their simple design, shaft collars play an important role in a wide range of industrial applications.
Yokelink Shaft Collars come in both inch and metric sizes and are available in either Carbon steel or 304 Stainless Steel. Yokelink shaft collars includes set-screw collars as well as one-piece (single-split) and two-piece (double-split) collars with zinc plated or black oxide finish. Our shaft collars are available for most common sizes ranging from 3/16″ to 4″ and 5mm to 100mm. When you need Shaft Collars, refer to our catalog, we offer them in a full selection of sizes, provide the diameter or part number to get a quote on these shaft collars, leave your message, or send us an email. You can also call us to get answers to your questions and place your order.
Shaft Collars,Zinc Plating Shaft Collars, set-screw collars, single-split Shaft Collar
Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com