(1) Snake farms Snake farms are also called Snake Parks. Site selection should consider snake species and their wild habits, try to simulate the wild environment under snake species, and facilitate snake feeding, molting and mating. For example, acroporus scrofa should be selected to sit north and south, more cool trees, close to the water, the environment of the secluded side of the mountain to build a field; if the conservation of snakes, silver ring snakes should choose flat, water-friendly plains, hills, orchards, vegetable gardens And so on.
Around 0.8 meters above the snake farm, it was cemented and grouted to prevent rats from burrowing and snakes from escaping from the cave. According to the situation of rearing different species of snakes, the interior walls can be divided into several small compartments, and different types of snakes can be reared separately. Some snake-type barramundi and pythons can be polycultured. All interior corners of the wall should be curved. The gates of the fence must be set on two levels. The inner door is open to the field and the outer door is open to the outside. This is safe and prevents the snake from escaping. It is also possible not to set a door, and personnel use the activity ladder to enter and exit the snake farm.
The facilities within the wall include snake nests (houses), pools, gutters, feed pools, rockery, rock dumps, activity fields, spawning rooms and hatching rooms.
Snake nests come in different forms, and they can be built into graveyard styles and caves. Ordinary snake nests can be made of masonry or tiled walls and piled with dirt. Snake nest height and internal diameter are about 50 cm long, covered with rain on the top, and easy to observe, take the snake and cleaning. A part of the ground floor is deep underground, with some sand or hay in the nest. Pay attention to waterproofing, ventilation, and heat preservation. Each nest has two openings, one of which faces south or southeast, allowing snakes to come and go freely. This type of nest can accommodate 10 to 20 medium-sized snakes. If it is a 30-square-meter snake garden, it will build 5 snake nests, and it will be possible to store about 30 bar-noses or 100 snakes. In addition, snake houses can also be built. For example, a serpent chamber measuring 5 meters in length, 4 meters in width and 1.2 meters in height would be built for a total of 24 cubic meters. First, build a wall of 20 centimeters thick and 1.2 meters high. Cover a thick cement slab on the roof. Leave a passageway in the center of the room. Make bricks on both sides to form many small squares. It is 20,2015 cm. Each cell is connected to the front, back, and left. A door is set at the exit of the main passage, leaving a few holes at the bottom of the door for snakes to enter and exit. This door is usually closed, play a role in blocking the wind, insulation, insulation. Open the door and the breeder can bend over to check. There is a ditch in the snake nest and snake house, and both ends of the ditch lead to the feed pool and the pool. Drinking water in the pool must maintain the cleanliness of the water quality; feed ponds often stock some yellow locusts, loach, frogs, and aquatic grasses, and install black light traps for frogs and snakes to prey. On the side of the snake farm, leave an activity field, pile a rockery or put some rocks, and plant some small shrubs, corn grasses and grasshoppers for the snakes to stealth, habitat, activities, and mating. In addition, a spawning and incubation room was built.
(b) Snake box snake serpentine boxes can be made of wood or masonry or cement. Its size can be large or small. Generally believed that 1 cubic meter can raise 1 meter long snake 4 to 5. Only one snake species can be cultivated in a halo box (male and female snakes can co-educate). The inner wall of the snake box should be smooth, and the box top should be equipped with small hole iron window screens, and then a sliding door should be installed. A short stump is fixed in the middle of the bottom of the box for the use of snake skins. The bottom of the box is then padded with 5 to 6 cm thick sand. A small water tray is placed in the corner of the bottom of the box to allow the snake to drink water and regulate humidity.
Snake box snakes cover a small area, simple, easy to observe behavior of snakes, but the scope of activities is small, is not conducive to the growth and reproduction of snakes. Snake box breeding is best combined with small snake garden feeding. Snake boxes are used for spawning, wintering, and feeding young snakes. Usually snakes are kept in the park.
Ganzhou Green days Biochemical Technology Co., Ltd. , https://www.tlqcjs.com