Small liquid filling machine failure and cover:
1. The crank cannot rotate normally after starting the machine. Fault:
A: The upper fixing rod is down, and the inner and outer tubes are firmly pressed when the syringe is pushed, so that the crank cannot be rotated. The nut 1 should be loosened, and the upper fixing rod is moved upwards to the outer position, and then the nut is tightened.
B: When the syringe is assembled, the inner and outer tubes are not cleaned and stuck, and the syringe needs to be removed for cleaning.
C: The end of the injection system is installed in the bearing part. Make it not a normal obligation and must be reloaded.
2, the injection is not uniform, the end of the joint is tight, there is a gas leakage phenomenon, you need to tighten further.
3, the machine rotates normally, but no liquid is discharged, fault:
A: There is foreign matter in the valve to be cleaned;
B: The upper and lower thimbles in the valve are placed with the partner. (The two thimbles are all pointed downwards and must not be reversed).
C: 100, 500ml type If there is liquid leakage at the lower end of the piston, the cylinder should be disassembled to replace the random seal. Note: The seal ring is made of φ65×3.1. acid and alkali resistant seal.
Small liquid filling machine disinfection method and washing:
1. Loosen the upper and lower set screws, remove the infusion system for overall disinfection, or assemble for separation and disinfection.
2. Put the inlet tube in the cleaning solution to start cleaning.
3, 500ml models can have errors in the actual filling, the volume of the measuring cylinder before the formal filling.
4. Bearing models for filling machines: 10, 1000087, 20, 100, 1000088, 500, 6001-ZZ.
5. Needle tube for filling machine, standard type 5ml or 10ml syringe for type 10, 20ml glass filler for type 20, and 100ml glass filler for type 100.
Trifanz has a range of high quality anaesthetic face masks available in six sizes from neonate to large adult.
This Anesthesia Mask by Trifanz Medical can be used for anesthesia, respiratory or resuscitation use. Anesthesia mask features clear flexible faceplates with a contoured cushion that creates a gentle seal with the patient`s face. This disposable mask is meant for single-use only and has a universal fit connector. This cushion is a soft, pliable air-filled cushion that includes an inflation valve on the top and hook ring. This Anesthesia Mask is Non-sterile and Latex-free, using only high-quality, medical grade, clear PVC. This mask follows ISO standard sizing and is available in a range of sizes for adult, pediatric and infant use. Masks are individually bagged with color-coded rings for size identification.
The silicone anesthesia face mask can be repeated use and autoclaved at 134℃
Type: Horizontal Valve Anesthesia Face Mask, Valve Up Anesthesia Face Mask, Non Valve Anesthesia Face Mask, Siliocne Anesthesia Face Mask
Size: 0# Neonatal to 6# Adult XL
Anesthesia Face Mask,Air Cushion Face Mask,Reusable Silicone Anesthesia mask,Medical Disposable Anesthesia Mask
Hangzhou Trifanz Medical Device Co., Ltd , https://www.cfzmed.com