The swing granulator develops the wet powder or the block dry material into the desired granules, and mainly makes the wet powdery mixture, through the positive and negative rotation of the rotating drum, forced through the sieve to make the granules. Professional setting.
Of course, when we use the swing granulator, we will inevitably encounter some problems, and these problems may be caused by improper maintenance. Therefore, I will explain to you some methods for daily maintenance of the swing granulator. :
1. Regularly inspect the machine parts once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
In fact, the maintenance and use of machinery is on the one hand, the machinery needs lubrication. The following is how to lubricate the equipment. It is not only suitable for the swinging granulator, but for the low-temperature vacuum drying machine, so take a closer look. .
1. The tank part of the machine is equipped with oil meter. It should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil overflow the cup, and do not flow to the surroundings of the machine and the ground, because the oil is easy to contaminate the material and affect the quality of the product.
Fresh Half Shell Mussel Meat,Half Shell Mussel Meat,Frozen Cooked Mussel Meat,Frozen Mussel
Shengsi Huali Aquatic Products Co.,Ltd , https://www.mytilus-edulis.com