Now that it has entered May, it is the key time for management, and the following aspects must be done.
1. Set fruits in time: set the fruits strictly, select the best and eliminate the poor, keep the center big fruits, leave one fruit every 25 cm, and keep the middle and short branches stronger on both sides, generally the good fruits are in the middle of the annual ring. If the amount of fruit on the tree is small, you can use the secondary shoots to keep both sides of the same good fruit to keep the double fruit to make up for the lack of output, but when the amount of fruit on the tree is sufficient, you must control the amount of fruit, 300 to 400 per stay, That's it, don't be greedy just to prevent big and small years.
2. Pull branches in time to maximize ventilation and light transmission and enhance the photosynthesis of fruit trees. Ensure good ventilation and light transmission environment of fruit trees.
Third, according to the phenological period of each place to carry out circumcision and promote fruit. Ring cutting is mainly used for young and prosperous trees. It is best not to use this method when the old tree has stable and normal results for many years. The best time for circumcision is the Guyu Festival. The altitude is more than 1300 meters. It depends on the time of wheat harvest. It is generally ten days to half a month before the wheat harvest.
4. Summer shears. Summer shears, including pulling branches, buds, twisting branches, and topping leaves are all within the scope of summer shears. Not only finger shears, I remind you again: less move shears, diligent hands, otherwise you may cut Next year's premium flowers and fruits!
Fifth, five and six supplementation is the key, if you miss the best time loss, it will be big!
Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone
Walking aids is an auxiliary device to assist the human body to support weight, maintain balance and walk. It can also be called walking aids, walking stands or walking aids. Among walking aids, walking aids can provide the greatest support and stability. Therefore, it is mainly used for patients with weak strength and poor balance, such as the elderly after orthopedic surgery, patients with poor coordination and Parkinson's disease, and children with cerebral palsy or developmental retardation. With the support of equipment, people with less flexible legs can walk and take care of themselves.
According to the structure and function of Walker, it can be divided into two categories: stick walker and frame walker. The walking aid is simple and light in structure, but its supporting area is small and its stability is poor; The frame walker has a complex structure, but it has a large supporting area and good stability.
Before using the walker, the user's physical condition and use environment should be comprehensively evaluated, including balance ability, lower limb bearing ability, gait, upper limb ability, cognitive ability, lifestyle and use environment.
Select a walker
1. The texture should be light and easy for patients to move.
2. The walker should be placed stably on the ground;
3. The height of the walker should be suitable or adjustable. When the patient stands in the walker and his hands are naturally sagging, he can hold the handrails on both sides and apply pressure on the handrails to ensure the support of weight and balance control;
4. The width of the walker should be moderate, not too wide.
TRUTECH CO., LTD. is an enterprise specializing in the research, development, production and sales of professional OTC products.The main products include shower chairs, armrests, toilet racks and toilet armrests, bedside armrests, elderly chairs and sofas, crutches and walking aids, knee pads, waist supports and other equipment.
Cane & Walker,Canes And Walkers,Cane Walker,Walking Stick
TRUTECH CO., LTD. , https://www.trutechealth.com