First, after the use of agricultural machinery in winter to a full maintenance in a timely manner.
Second, iron parts should be cleaned, painted with oil, butter or antirust paint after drying, especially the screws and other connections, to prevent rust to shorten the service life.
Third, the rubber parts of the equipment are damp or stained with oil, and they tend to age and crack. This shortens the service life. Therefore, the V-belt or flat tape on the machine tool should be removed, hung on the wall or placed in a dry and ventilated place. During parking of the tractor during storage, jacks or bricks are used to jack up the front and rear axles of the locomotive to lift the tires off the ground, not to bear the load, and to maintain proper air pressure.
Fourth, to prevent deformation of spring parts, clutches of hand-held tractors are often combined type, after the storage parked, the handle should be placed in the "closed" position, otherwise, the clutch spring long-term compression, will lose flexibility caused by deformation, scrapped in advance; The intake and exhaust valves of the engine should also be placed in a closed state to avoid long-term pressure on the valve spring and to prevent dust from entering the cylinder.
Fifth, to prevent the motor from getting wet, the motor used in farm machinery is not used for a long time and it should be placed in a dry, ventilated and clean warehouse. To prevent the internal insulation performance of damp street surface from falling, causing short circuit, grounding, leakage, and even burn out the coil.
Sixth, when the tractor is not in use in winter, due to long parking time, the battery should be removed, the surface cleaned, the surface of the electric pile painted "Vaseline" and then placed in a dry warmer room, once a month to make a supplementary charge, In order to prevent the battery from curing.
Our Pp Resin has a very stable physical and chemical properties according to our professional tests. In addition to the great resistance of shocking strength and other mechanics performance, it also has a good processing performance. Our products have a high heat resistance property which allows us to apply the products in a high temperature environment. Also, the resin pellet has a lazy chemical property, it will not have a react with our daily medical medicine easily. And this also gives us a safety guarantee.
Pp Resin For Soft Bottle,Pp Copolymer Resin,Polypropylene Resin,Pp Homopolymer Resin For Bottle
SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com