Awesome! Common problems and solutions for the maintenance of edible oil filling machine

Still worrying about the maintenance of edible oil filling machine? Jinan Dongtai Machinery will solve your problems. Jinan Dongtai Machinery has more than ten years of experience in the manufacture of filling machines, specializing in the manufacture of oil filling machines, sauce filling machines and other filling equipment. So experienced, they have summarized some common problems and solutions for the maintenance of edible oil filling machines. Manufacturers in need can quickly look over and may save a lot of maintenance costs.

First, the machine can not start:

1. Turn on the power, turn on the power switch, and check the fuse.

2. Release the emergency stop button.

3. Turn on the air pressure and keep it at around 6 kg.

4. Check if the switching power supply has DC24V power output.

5. Check if the touch screen and PLC communication line are loose.

Second, no blanking:

1. Check the air pressure and check the touch screen maintenance mode screen.

2. Whether the nozzle is closed or not, check the circuit.

3. Feeding.

4. Check the air pressure, check whether the injection cylinder and cylinder are dead, check whether the nozzle is closed under the touch screen maintenance mode screen, and check the circuit.

Third, leakage:

1. Tighten the lower nozzle and replace the lower nozzle seal.

2. Replace the cutting tube.

3. Clean the pneumatic valve and replace the pneumatic valve gasket.

4. Replace the injection cylinder seal.

Read these, have your problems solved? If you haven't solved it yet, you can visit Jinan Dongtai Machinery Manufacturing Co., Ltd., we will solve the problem for you in time.