Emulsified asphalt consistency tester instructions

Emulsified asphalt consistency tester Model: SYD-0751

SYD-0751 emulsified asphalt consistency tester is stipulated in T0751-1993 "Emulsified asphalt slurry seal mixture consistency test" in JTG E20-2011 "Testing Regulations for Highway Engineering Asphalt and Asphalt Mixture" of the Ministry of Communications of the People's Republic of China. Requires design and manufacture. It is suitable for determining the consistency of the emulsified asphalt slurry seal mixture, and is used to test the paving workability of the emulsified asphalt slurry seal mixture to determine the suitable water for the mix design of the emulsified asphalt slurry seal mixture. the amount.

First, the main technical characteristics of SYD-0751 emulsified asphalt consistency tester

1. It consists of a truncated cone, a pad and a bottom plate, and has a simple structure;

2, the truncated cone is made of aluminum alloy, beautiful appearance;

3, the bottom plate is made of stainless steel, durable and with a scale for easy reading.

Second, SYD-0751 emulsified asphalt consistency tester main technical parameters and indicators

1. Metal frustoconical body: upper diameter 38mm, lower diameter 89mm, height 76mm;

2. Metal bottom plate: Thick 4mm with concentric circle tick marks, spacing 0.5cm.

3. Dimensions: 235mm × 235mm × 80mm (length × width × height).

Third, SYD-0751 emulsified asphalt consistency tester options

1. Balance: Weigh 1000g, the sensitivity is not more than 1g.