The selection of an ideal three-wheeled agricultural transport vehicle is a dream for the economically affluent farmers when they are busy farming and transporting them at their leisure. So, how to pick a wishful three-wheeled agricultural transport vehicle (hereinafter referred to as "three-wheeled transport vehicle")?
When purchasing, it should be confirmed in the three-wheeled transport vehicles promoted by the Ministry of Agriculture's “Agricultural Machinery Promotion Permit†to choose among famous and valuable products with local practical value, and also to provide mechanical properties, product structure, maintenance and spare parts. Comparing with general performance, price, etc., the best models and the most economical vehicles with the best product quality are selected.
Regardless of the selection of a steering wheel or handle type three-wheeled transport vehicle, roughly the following methods are used:
1. Selection method
In the parking lots or three-wheeled transport vehicles in the parking lot or in the warehouse, stand at a slightly higher position, observe the general outline and appearance of each car, select the best condition, bright luster, no scratches, scratches, etc. After the vehicle, it is designated as the preferred vehicle.
2. Identification
Observe whether the brand, brand, and model of the selected vehicle are the ones in mind, and then identify the year, month, and year of the nameplate. It is best to buy new products just after delivery. In addition, we must check the welding quality of the frame to see if there are any places where the welding is not reliable or where the welding is lost. Weld cracking, slag inclusion, etc. are defects in the welding quality.
3. Technical Law
The three-wheeled transport vehicle consists of an engine (diesel engine) and a chassis. Before the trial run, read the manual for the diesel engine and start the engine in accordance with the technical specifications of the diesel engine. The diesel engine must have good starting performance, normal operation, and low power consumption. In the absence of obvious manufacturing defects, technical inspections of the steering, braking, lighting, horns and other facilities of the chassis were performed until they were satisfied.
4. Experience method
When an experienced driver attempts to drive a vehicle, he can know how the technical situation is from the following aspects.
(1) Brake at the test site with a high gear and a large throttle at a straight line of 15 meters or so, hurry to step down the brake pedal, three wheels stop completely due to sudden brakes, check whether the two brake markings are the same, and then press the car , Stop in different directions on the slope of about 20 degrees, tighten the hand brake to see if the vehicle has a slippery phenomenon.
(2) The steering steering operation should be light and flexible, and there should be no abnormal phenomena such as yawing block and stuck cards. The joints in the steering system should be solid and reliable, and there should be no phenomenon of welding, loosening or damage.
(3) There is no stuck noise in gears, and there must be no abnormal noise in the gearbox. There is no abnormal change in the vehicle's driving and it feels good.
(4) The brightness, luminosity and range of the headlights and taillights of the lights shall meet the specified requirements. The turn signals, brake lights and driver lights shall be complete, and the apparent brightness can be displayed according to the operation requirements.
(5) Other wipers should be flexible, left and right rear-view mirrors (reversing mirrors) should be complete, loud speakers, windshields safe and reliable, tire pressure consistent.
5. After-sale service
After the three-wheeled transporter was sold, the factory provided "Three Guarantees" service to ensure technical advice and technical guidance. Which manufacturer's after-sale tracking service has good quality, high reputation, and complete service projects, the three-wheeled transport vehicle produced by this factory is the object of selection.
Our spike ports are widely applied in transfusion soft bag packing issues. Our products have perfect sealing capacity and can fit in with soft pipe well. We have advanced product design and process craft.The patent design helps prevent falling rubber chip gasket,this ensures the product very low needle chip drop and good puncture retention,it can also reduce hospital complaints.Our ports are easy to open, can completely eliminate the impact of aluminum chips and give excellent safety performance.We now have ten thousand production workshop, local production under 100 class conditions, to ensure the cleanliness of the products. A special structure is adopted to ensure that the completely closed cover body can be opened quickly, and the safety and cleanliness of clinical use are guaranteed, and the patent certificate has been obtained.
Spike Port,Disposable Infusion Spike Port,Medical Infusion Spike Port,Infusion Spike Port
SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com