Factors affecting the pulverization effect of WFJ series superfine pulverizer:
1. The nature of the material.
The raw materials have many properties, such as: brittleness, toughness, fiberiness, sugariness, oiliness, etc. The properties of the raw materials should be determined before pulverization, and then different methods are adopted for materials of different natures. For example, high-sugar, high-oil materials can be bonded together without external force, and they cannot be crushed by crushing brittle materials. By comminuting with other materials, the ratio does not exceed 25%.
2. The moisture content of the material.
The ultrafine pulverizer requires a high water content of the material, generally not more than 10%, because the finer the powder, the more the moisture comes out, the specific gravity of the material is increased, and the plurality of particles are stuck together. If the water content of the material is high, the pulverization increases the difficulty and the yield is also reduced.
3. Maintenance of equipment.
Regular maintenance of the equipment is the guarantee of the service life of the pulverizer and the fineness of the pulverization. The equipment needs to be regularly filled with lubricating oil, check the aging degree of each seal, and the wear of the pulverizing medium.
4. Feeding fineness.
The instructions for use will definitely indicate the fineness of the feed. Generally, the feed will be marked below 1mm. The too small feed fineness will have a great impact on the life of the machine, and it will be very difficult to crush. In fact, this is the same as eating. Chewing slowly, it helps digestion.
Adhesive Wound Dressing,Medical Small Wound-Care Plaster,Medical Waterproof Transfusion Wound Plaster,Medical Elastic Adhesive Aid-Band
Surgimed Medical Supplies Co.,Ltd , https://www.surgimedcn.com